SKU: FMINDK30
This Forge intake kit is for the VW Up 1.0 TSI and GTI. Our intake kit includes a bespoke aluminium housing, powder coated black for that OEM look and for a hard wearing finish. This has a dual purpose of protecting the filter from heat soak. (A replacement filter for this kit can be found here).
With the engine bay on the VW Up being so compact, the development team were hugely restricted in finding a suitable location for an aftermarket induction kit. After lots of testing and different locations explored, we felt this induction kit is most suited to the VW Up, both for performance and aesthetics. With gains of 5bhp and 6lb/ft torque throughout the rev range, we are extremely pleased with the performance results; not to mention the different sound our intake gives this punchy little 1.0 litre engine. Higher gains can of course be expected mapped vehicles.
The Forge silicone hose has a larger bore and smooth finish inside giving optimum flow and comes in a choice of 3 colours: black, red, or blue. Please select colour from the drop-down list above.
- The construction of this hose has been engineered to exceed that of the OEM fitments and will enhance any engine bay both technically and aesthetically
- Lifetime warranty*
The filter is manufactured to Forge’s specifications by Pipercross
- Washable and reusable design.
- Layered multi-density foam technology.
- Designed and manufactured in Great Britain.
- Improvement in engine power and torque with superior engine protection from dirt and dust ingress.
- Designed to flow stronger for longer.
Why not add gold tape to the underside of the aluminium housing to further reflect any heat soak from the engine. The Gold tape comes on a 5 metre roll allowing you to apply it to the underside of your Forge Motorsport product.
Fitting is straightforward and can be completed in 20-30 minutes.
This kit requires no cutting or modification to the vehicle, allowing it to be reversed back to stock.
DO NOT OVER TIGHTEN
When fitting the filter to its counterpart please ensure you do not over tighten the hose clamp connecting them. Doing so could result in the part being crushed, leading to fitment and/or performance issues. The recommended torque setting for this hose clamp is 2-2.4Nm
Free shipping for all orders over £200.
All products ship from our warehouse and workshop in Newbury, UK.
Fitting service available on all products at our Newbury Workshop - contact us to find out more and for a quote
All products come with 30 day no quibble returns policy - if you need to make a return, please contact us on +44 01635 450 91 or info@selectmotorsport.co.uk with your order number.
All returns must be unfitted and in as new condition with packaging undamaged
Race Use Only Disclaimer:
Unless otherwise specified, all products sold by Select Motorsport Ltd are intended strictly for race use only. These products are designed and manufactured for competitive motorsport purposes and are not suitable for use on public roads or for recreational off-road activities. It is the responsibility of the purchaser to ensure that the products are used in accordance with all applicable laws, regulations, and safety guidelines governing competitive motorsport events.
Select Motorsport Ltd does not endorse or condone the use of its products for any illegal or unauthorized purposes. The purchaser assumes all risks associated with the use of these products, including but not limited to damage to property, personal injury, and legal consequences resulting from non-compliance with applicable laws and regulations.
By purchasing and/or using products from Select Motorsport Ltd, the customer acknowledges and agrees to abide by this race use only disclaimer. Select Motorsport Ltd shall not be held liable for any misuse or unauthorised use of its products.
RECENTLY VIEWED PRODUCTS
